Okay, so I stand corrected. Some people do have time to learn weaving and continue on to produce beautiful products. This is one I have been admiring a bunch lately, in addition to this, this, and this. For those of us who have more admiration than free time, a little shortcut doesn't sound so bad, right? I tried a couple of ways and finally settled on this tutorial to create a non-woven but still 'woven-like' trendy wall hanging. The best part is that it took an insignificant amount of time (1-2 hours), can be easily customized even after it is completed, and cost me less than $25 for all the materials. Boo yah! So let's get started...

The items you will need: yarn (variety of colors/sizes/types), stiff plastic canvas, thread (the slightly thicker the better), scissors, stick (I used an old paint roller), and leather string for hanging. Keep in mind that you can add any other type of detail to your piece such as wooden beads, fabric scraps, etc. depending on the look you are going for. I spent about $16 on yarn. $0.50 on the canvas, $4.00 on thread/leather string, and $0 on the stick = a total of $20.50!

Basic steps: First start by sketching a rough template of what the final piece will look like. It doesn't have to be exact and does not have to be followed once you get going. Just gives you a nice visual to have before getting started and to refer back to if needed. Next, start making the yarn tufts. For the longer length pieces, I wrapped the yarn around the length of my arm, tied a piece of thread to each side of the loop, and cut across the loop in the middle to yield two tufts each tied together by thread. The more you wrap the yarn around your arm, the thicker your tufts will be and the less you will have to make to go across the width of the board. For this top gray layer I made 6 tufts, each created after wrapping the yarn around my arm about 20 times. For smaller tufts, I simply wrapped the yarn around the palm of my hand. Once you have created your tufts tied to string, you can start attaching them to the plastic canvas. For the very top layer, make sure to leave the first row of boxes open so you attach the board to the stick to be hung up. So starting in the second row, simply slide the strings through the boxes in the plastic canvas and tie them together into a knot on the back of the canvas, making sure the tuft is pulled up close to the board as much as possible. Now just repeat! Space the yarn tufts out so they overlap enough not to show the canvas underneath. Once all set, trim off any excess edges or cut the yarn as desired to get the look you want.

The last step is to attach the plastic canvas to a wooden stick. I used an old paint roller we had laying our the apartment which ended up being the perfect size. First I looped leather string through a couple holes in the top corners of the canvas then loop them numerous times around the ends of the stick. Bring the two strings together at the top and tie them together with several knots. Hammer a nail into the wall and hang. All set!

Feel free to experiment with various styles/colors! At one point I wrapped yarn around the board itself rather than creating tufts. I made a cascading effect by cutting the yarn at different lengths or tying the yarn tufts in a diagonal rather than straight across the canvas. Share if you do create one - I'd love to see!

DIY || #26 || Out on a limb

Keeping with the theme of my apartment decor, such as my botanical wall and jewelry holder, I've done it again with my window treatments using the most basic materials! It is such a unique addition to the room and surprisingly only took an hour from start to finish to complete. The hardest part about this project is finding the branches, which was surprisingly a breeze for me after discovering a pile of branches in my previous apartment building's back lot. The goal is to find evenly sized-length branches if you are doing more than one window, and also that they are medium weight - not so thin they will snap but not so heavy they won't stay up. I wanted my branches to blend with my wall so I spray painted them white and let them dry overnight. Here's what you''ll need: branch(es), spray paint (if you want to color them), measuring tape, screw-in bicycle storage hooks, nail (or screwdriver), hammer, and curtains. 

Measure how high you want your branches based off the length of curtains you have, then measure perpendicularly across the window top and make two light marks with a pencil - one where each hook will be. Because I don't have a screwdriver to drill holes in the wall, I simply used a thin nail to hammer a small hole, pulled it out, then screwed in the bike hooks (using some muscle!). Once the hooks are secure simply place the branch across them and check that it is even. If your curtains have loops, you can slide them across the branches. Since mine did not, I cut small holes along the top of the curtain and tied them to the branch using twine ribbon. I found this works better because I could adjust the curtain length based off how tight or loose I tied the ribbons (this helps if the branch is curved and would result in uneven curtain length at the bottom). Alright, that's it! 

Just so you can see what it looks like before the curtains - another great idea just for general decor!

DIY || #25 || Natural Wallpaper in 3D

Despite the many downsides to moving, there also quite a handful of joys. For starters, you get to rid of stuff you somehow managed to hide away for months. And the best part is planning an entirely new decor theme for your space. As always, I got my eye on keeping a low budget all the while finding unique ways to style my space. Thus, I present to you, the Framed 3D Botanical Wall! Some of you may have seen a twist to this DIY from before when I was in college, but now that I've 'upgraded' to real-world adult life, I've transformed this decor into something more refined, polished, and sophisticated. As always, super easy and super affordable! Here's the break down:

You'll need: empty frames (bought a whole bunch of different sizes at Goodwill for $2 each!), fake flowers, cream colored masking tape, scissors, nails, and a hammer. 

I first started out by organizing the frames and flowers on the floor to get an idea of a pattern. Then, simply hammer nails into the wall where desired, hang your frames, and tape the flowers into an organized and neat pattern. Easy breezy!

I kept my decor just to a diagonal, but you could easily fill up a whole wall with this decor. Hope y'all like it!

DIY || #24 || Homemade Creamy Coconut Popsicles

Despite being someone who isn't all too crazy about eating coconut or coconut flavored things, I am madly in love with coconut popsicles. I think it originates with the many afternoons my pops and I would get coconut popsicles at the mexican food stands during the summer. It was always a father-daughter afternoon treat. With father's day upcoming, I thought it was quite fitting for this DIY treat! Besides, these are ridiculously easy to make, taste like gourmet (seriously), and require few ingredients! I used this recipe as a template to go off of - it's great for creating that creamy yet not overpowering flavor.

You'll need (for 6 popsicles): 1 can of pure coconut milk, 1/4 can of sweetened condensed milk, 2 teaspoons of vanilla, 1 cup of unsweetened coconut flakes (feel free to add more), sugar to taste (I barely added any), and a couple dashes of cinnamon. The instructions from here are beyond easy: mix everything up in a large bowl, add the coconut flakes last, do a quick taste check, pour into popsicle molds, add sticks, then pop those babies in the freezer! They froze fairly quickly, but I just waited until the next day to enjoy them. Honestly, these turn out just as good, if not better, than the store-bought ones. Bon appetit!

Some other great ideas you might try: add a little rum flavor for a pina colada type of taste, mix with other fruit juices such as pineapple or mango, or make them as ice cubes and toss them into a summer cocktail! Enjoy!